Products Show
Flexible Shaft & Hand Piece — TM-41
TM-41 -To be used with Electric Drill
| Desc. | TM-41A | TM-41B | TM-41C |
| 1.Drive Pin Diameter： | 6mm | 8mm | 6mm |
| 2.Shaft Length x Diameter： | 130 x 1.2cm | 130 x 1.2cm | 128 x 1.2cm |
| 3.Drill Chuck Size： | 6mm | 10mm | 6mm |
| Max Speed： | 2800RPM | 2800RPM | 2800RPM |
| Max Strength： | 8Nm | 8Nm | 8Nm |